George Dow
4/27/2008 6:13:23 AM
My blower moter makes an unbearable vibration and noise when it's on high or next to high speed. Any remedies or suggestions? BTW 2000 disco II.
Spike555
4/27/2008 7:17:06 AM
You need a new blower motor, the bearings are going bad.
Short term solution dont run it that high.
Disco Mike
4/27/2008 7:26:12 AM
And or you may just have some junk that has been sucked into the blower fan. You should pull it out from behind and under the glove box and see for sure.
George Dow
4/27/2008 1:01:00 PM
Thanks guys, I'll pull the blower motor and promise I'll spell motor the correct way from now on.
G
Spike555
4/27/2008 2:30:33 PM
quote:
ORIGINAL: George Dow
Thanks guys, I'll pull the blower motor and promise I'll spell motor the correct way from now on.
G
LOL. Let us know how it turns out.
brennera
4/27/2008 3:28:13 PM
Just Had the same prob, except it was vibration at anything over low speed. Figured bearings were bad, but pulled it just in case to take a look b4 forking out $350. Was a piece of insulation stuck in the blower. Put blower back, works great!
