Disco II IPF Lights on front Bull Bar

Anyone-
I have a 2001 Disco II with two IPF 50watt driving lights/ high beems mounted on a front grill bull bar. These use to come on when the lights where in the highbeem mode and the factory switch was pushed in on the dash control panel on the left hand side.  I wanted to know if anyone has this same set up on their rig and if so what your relay system looks like. My lights stopped working all of a sudden and I traced the lines back to a relay that was screwed into the back of my under-the-hood relay setup. I am trying to locate this same relay or rewire if anyone knows of a relay that would work. I am ok with wires but know a minimal amount as you probably already have gathered.
 
Thanks, Duckhunteryolo-