jmerrill
5/11/2006 3:01:32 PM
I have a little bit of a problem here -
I ordered upper and lower oil cooler lines for my 95 disco I around December, because mine had a slow leak around the part where the hard line turns into soft line. Anyhow - I'm right in the middle of changing the lines and oil pan gasket and go to the garage to get the new lines and realize they are the wrong ones. I have since ordered the right ones, and I am thinking about selling the wrong lines I have on ebay. The problem is, is that I don't know if they are oil cooler lines for a disco II or something else completly. I'm hoping some of you veterans of the rover war can help me out in identifying these two guys. thanks. Jonathan
oh, they came in Land Rover sealed bags that have the part number on them, but when I called my local LR dealer they said they ID # isn't in their system. The numbers are ESR 355 and ESR 356.
Thumbnail Image
jmerrill
5/11/2006 3:03:59 PM
All the ends of the hoses have rounded ends - see picture below. any help will be greatly appreciated.
Disco Mike
5/11/2006 3:45:53 PM
Why don't you return the hoses that sold them to you, isn't it their fault?
Mike
jmerrill
5/11/2006 3:59:39 PM
Their return policy was returns within 30 days or so, like I said, I got them in December but haven't had the time to install them until now. so I'm kinda stuck
4x4guy
5/18/2006 4:48:26 PM
As i work at a dealership in the uk i will try to identify them for you and post a reply in the next couple of days .Just hang in there and let me see what we can make of them >Paul in the uk
4x4guy
5/19/2006 3:58:35 PM
As i thought the hoses are for a classic RangeRover v8 the chassis range is from ja610294 to la647664 so you need to find someone with an old shape classic ,hope this helps Paul in the uk.
jmerrill
5/21/2006 12:27:08 AM
I really do appreciate your help on this Paul. I wanted to sell them but didn't know what the hell they were. So now i know. thanks again. jonathan
