jvcuevas
1/11/2008 7:08:34 PM
I've got a 2000 Range Rover 4.6 with 83K miles
My Service enging soon light is constantly on.. I get it reset, minutes later it back on.. I've changes the Mass Air Flow meter.. Light still stays on. I get the following error Codes
0734
p1412
p1415
any ideas?
Disco Mike
1/12/2008 7:04:30 AM
I can't find the 1412 and 1415 codes thru 3 different areas, don't know what to tell you. The new MAF should have cleared off your 4 th. gear out of ratio code.
jvcuevas
1/12/2008 7:24:00 AM
Thanks Mike.. is there a Mass Air Flow Meter and sensor? I replaced the Meter.. I saw a site selling the MAF meter and sensor as two separate items?
Disco Mike
1/12/2008 10:11:43 AM
The MAF is attached to the air intake tube between the air filter and the t/body. Normally it is sold as one piece, some places sell just the coil porton of it.
raid13
1/12/2008 11:56:15 AM
did you clear the code and reset adaptions from the transmission control module too?
resetting adaptions is very important to making the code not return.
jvcuevas
1/12/2008 3:51:08 PM
My buddy at the auto repair shop cleared the code using and ODBC Connector???? How do you reset adaptions? Do I need another tool to complete that task??
Thanks a bunch
raid13
1/12/2008 8:34:35 PM
can his scan tool read engine and transmission codes? if so than he should be able to also reset adaptions.
