|
BMWLR -> RE: FOR SALE Offroad guards (6/3/2006 4:17:24 PM)
|
There is some surface rust (nothing deep, no holes) and paint pealed-off on some areas but it is really an easy fix BUT ONLY IF you are very picky with it once they are on the truck.
There is a slight bent; however, the bent is really a matter of pulling it and putting it back in to place (I guess I should off done it before the pics… you would no realize it was there).
Still, even with these imperfections, I can tell you that the bush guards are in very good condition and like any other used ones, they are on average/normal condition for 11 years old parts.
No mounting hardware is needed. The front bush guard utilizes the same 4 long screws that are already on your truck holding the bumper. It is really easy 15 to 30 minutes mount/un-mount. The rear bush guards are very easy to mount too. You just need to unscrew the taillights, fit them inside the bush guard and then screw back on the taillights.
Any offers...!!!
|
|
|
|
