RE: ABS Light HDC failure Light and TC light have come on, WHY???

Land Rover Forums Land Rover Classifieds Photo Gallery Member List Calendars Search Contact Us Sponsors
Land Rover Lineup News Forum FAQ Land Rover Recalls TSBs Timeslips Register Login

RE: ABS Light HDC failure Light and TC light have come on, WHY???

Printable Version

Land Rover >> Vehicle Line Up >> Discovery >> RE: ABS Light HDC failure Light and TC light have come on, WHY???

Page: << < prev 1 [2]

Message

<< Older Topic Newer Topic >>

RE: ABS Light HDC failure Light and TC light have come ... - 11/3/2006 8:03:04 PM

Elhoff

Posts: 87
Joined: 4/12/2006
Status: offline

I just went through this on my 99 Disco 2. I was running drilled/slotted rotors, and carbon fiber pads. I had lots of rear pad left, but was down to about 3mm on the fronts (still in spec). Changed the pads to factory pads all around, and had the dealer clear the errors (front right ABS sensor had variable output). One week and 300 miles later, all is still well. Dealer commented that they see more of these errors with the slotted/drilled rotors (but no attempt to get me to change).

Elliot

(in reply to Desertdualsport)

Post #: 11

RE: ABS Light HDC failure Light and TC light have come ... - 11/4/2006 11:27:18 AM

ryanrover

Posts: 26
Joined: 10/29/2006
Status: offline

So I have the same thing as well. I can hear a ringing noise coming from the ABS housing area, even when the vehicle is shut off. I also have to pump the brakes to get a solid braking effect to take place. I have not had the rotors/pads looked at yet. Any ideas on the ringing part?

Thanks,
Ryan

(in reply to Elhoff)

Post #: 12

RE: ABS Light HDC failure Light and TC light have come ... - 3/6/2007 5:49:33 AM

Craig SA

Posts: 4
Joined: 3/6/2007
Status: offline

Hi Mike,

I live in South africa in the middle of the Kalahari - far from dealers etc that can help. I seem to have the same problem as mentioned in this thread.

My brakes squeak and quite clearly need to be replaced. Today, all 3 lights came on, so I assume that it is time to tackle the job.

Can you assist me in going through the replacement step by step. I hope to have the parts here by the end of the week. Am I correct in saying that at this stage all I need to order is the brake discs and a set of pads?

Craig

(in reply to Desertdualsport)

Post #: 13