leaking anti freez (Full Version)

Land Rover Forum >> General Land Rover Forums >> General Tech Help

leaking anti freez

  

El Jefe -> leaking anti freez (3/31/2007 4:33:32 PM)

Hi, i'm new. i do not own a rover, but i'm working on my sister-in-laws 99 Dicovery II. i hope i can get some help from you guys.

k, it started to leak antifreeze real bad on the drivers side. looked as if it was coming from the head, like a blown head gasket. well i just got the head off, and the gasket looks fine, can't find a crack in the head or block. what the heck else could it be?

  
okdiscoguy -> RE: leaking anti freez (3/31/2007 5:05:38 PM)

I have a D1, but I think I remember hearing about the hoses going to the throttle control leaking. Land Rover made a kit to fix this. If you don't hear back from anyone else, re-post this in the discovery section, or search that forum. There are posts about it there...

Good luck!

Disco Mike -> RE: leaking anti freez (4/1/2007 9:46:42 AM)

It is either the heating unit that goes into the throttle body or the head gasket. By the way, you can't inspect a head gasket by looking for cracks, the best way to verify if the head gasket is leaking is to due a pressure test on the coolant system.
Mike

jshooter535 -> RE: leaking anti freez (4/1/2007 10:38:54 AM)

thats all i fix is land rovers and i am doing a 99 discovery that had the same problem that your having i pressure tested the system and it wouldn't hold any pressure and i checked all the hoses so the only thing left to look at was the head gaskets.. turns out the gaskets were good, but the heads were warped. you wouldn't be able to tell by looking at it you need a straight edge to check it and you might find your problem..

El Jefe -> RE: leaking anti freez (4/1/2007 2:37:51 PM)

warped head huh. that kinda crossed my mind. how many thousandths is exceptable? being aluminum, is it possible to get it machined? how much you think a new head is?

and thank you very much. this has been a head scratcher, since i was positive it was a blown head gasket.

jshooter535 -> RE: leaking anti freez (4/2/2007 9:26:04 AM)

you can send it to a machine shop

Disco Mike -> RE: leaking anti freez (4/2/2007 10:29:30 AM)

I agree, send the heads out to a shop and have then checked. Worse case if you have a ba head, here is a great site to buy used ones from,
http://www.roverlandparts.com/index.asp?PageAction=VIEWCATS&Category=148
Mike

jshooter535 -> RE: leaking anti freez (4/2/2007 2:06:43 PM)

well depending on where you live i work for a independent land rover shop so i might have some heads laying around if you need them... let me know and i will check ...

El Jefe -> RE: leaking anti freez (4/2/2007 5:58:40 PM)

i'm going out to check for warpness right now. my dad has a friend  that works at a machine shop that will mill it for me. I am really gonna check closley for cracks too. I live in Ogden UT. thats bout 45 miles north of Salt Lake. if I  need a head, I'll let ya know. hey, did you guys know Rovers are expensive to fix?

El Jefe -> RE: leaking anti freez (4/2/2007 7:38:16 PM)

i put a straight edge on it, found a couple spots that are warped, but not where it was leaking. also, there is no trails on the head gasket to indicate its leakage passage. but you can see where the gasket wasn't sealed properly. weird. i'm taking the head to the shop tomorrow. i'll have him check for warpage, and any possible cracks i can't see. and then mill it down if necessary. thanks for your help.

  

Page: [1] 2   next >   >>

Return to Land Rover Forums home page or view the Full Version of this page.