using stock amp with amp integration harness

Land Rover Forums Land Rover Classifieds Photo Gallery Member List Calendars Search Contact Us Sponsors
Land Rover Lineup News Forum FAQ Land Rover Recalls TSBs Timeslips Register Login

using stock amp with amp integration harness

Printable Version

Land Rover >> Brand Reviews >> Audio/Visual Electronics >> using stock amp with amp integration harness

Page: [1]

Message

<< Older Topic Newer Topic >>

using stock amp with amp integration harness - 4/29/2007 6:04:14 PM

agentmilo

Posts: 4
Joined: 4/29/2007
Status: offline

i bought an aftermarket deck to install in a 1998 range rover. there is a stock deck running all the speakers. i bought a wire harness and it came with an amp integration harness which has 4 rca connectors on it. i connected it to my deck and hooked up the remote wire of the stock amp to the remote from my new deck. when i turn it on there is music coming out but there is also a very loud high pitched humming sound that i cant get rid of. any suggestions?

Post #: 1

RE: using stock amp with amp integration harness - 5/3/2007 12:22:06 PM

agentmilo

Posts: 4
Joined: 4/29/2007
Status: offline

the problem seems to be that when i try to manually turn on the stock amp using the remote wire coming off it there is some sort of feedback or interference and i get this high pitched sound on my speakers even if the deck and car are both off.

(in reply to agentmilo)

Post #: 2

RE: using stock amp with amp integration harness - 5/3/2007 12:28:32 PM

wease206

Posts: 101
Joined: 2/26/2007
Status: offline

try a noise filter if that does not work then you might have to run it with the amp and it is pretty easy to no the door is were the amp are locted at each door has one and go out and buy a new amp you will have a amp sound

(in reply to agentmilo)

Post #: 3

RE: using stock amp with amp integration harness - 5/4/2007 4:41:01 PM

agentmilo

Posts: 4
Joined: 4/29/2007
Status: offline

i tried a noise filter and it didnt change anything. how can i bypass the amp and wire the speakers directly to the new deck, i guess this amp integration kit was a waste.

(in reply to wease206)

Post #: 4