RE: Brakes/Rotors/Sensors

Land Rover Forums Land Rover Classifieds Photo Gallery Member List Calendars Search Contact Us Sponsors
Land Rover Lineup News Forum FAQ Land Rover Recalls TSBs Timeslips Register Login

RE: Brakes/Rotors/Sensors

Printable Version

Land Rover >> General Land Rover Forums >> General Tech Help >> RE: Brakes/Rotors/Sensors

Page: << < prev 1 [2] 3 next > >>

Message

<< Older Topic Newer Topic >>

RE: Brakes/Rotors/Sensors - 5/4/2007 2:22:35 PM

GregHaugen

Posts: 28
Joined: 10/21/2006
Status: offline

I confess I've never serviced a New Shape (L322) RR's brakes, but I've done everything else on all other models. Here are some screen shots of the shop manual section regarding brakes. I don't know if they will all fit on one post but here it is. I've done most of my shopping at Britsh Pacific and Marty is very helpful.

Attachment (2)

_____________________________

Greg Haugen
Fargo ND USA
'90RR ex-V8 now 300Tdi "Jeeves"
'99RR 4.0 "Winston"
'00DII not yet named

(in reply to ArizonaDiscovery)

Post #: 11

RE: Brakes/Rotors/Sensors - 5/4/2007 2:26:09 PM

GregHaugen

Posts: 28
Joined: 10/21/2006
Status: offline

They wouldn't all fit on one.

Attachment (2)

_____________________________

Greg Haugen
Fargo ND USA
'90RR ex-V8 now 300Tdi "Jeeves"
'99RR 4.0 "Winston"
'00DII not yet named

(in reply to GregHaugen)

Post #: 12

RE: Brakes/Rotors/Sensors - 5/4/2007 2:32:17 PM

GregHaugen

Posts: 28
Joined: 10/21/2006
Status: offline

last picture

Attachment (1)

_____________________________

Greg Haugen
Fargo ND USA
'90RR ex-V8 now 300Tdi "Jeeves"
'99RR 4.0 "Winston"
'00DII not yet named

(in reply to GregHaugen)

Post #: 13

RE: Brakes/Rotors/Sensors - 5/4/2007 3:51:26 PM

DISCOHAITI

Posts: 8
Joined: 5/4/2007
Status: offline

I have a 2000 Disco and I just replaced all the rotors and pads for under $500 (DIY). Excellent deals at Roverparts.com. I also got a set of Bilstien Shocks and a Steering Damper from them. Parts and Labor are hard to find in Haiti so I do most the work myself when I drive across to the Dominican Republic. I just bought an Actron autoscranner because my ABS/TC/DHC lights all came on and now my Service Engine soon light. Should be a good investment since it only cost me $99 from JC Whitney. The Land Rover Dealer in the DR wants to charge $100 to read the codes! At least now I have my very own reader.
Maybe someone here can help me with a recent problem.... The car runs smooth while driving but during hard braking the steering wheel vibrates and only during braking. Any ideas what might be causing this??

(in reply to sysroute)

Post #: 14

RE: Brakes/Rotors/Sensors - 5/7/2007 10:26:02 AM

sysroute

Posts: 55
Joined: 2/2/2007
Status: offline

Thanks for the help guys. The truck has 33,000 miles on it. I have a 5-ton jack and plenty of tools. I just don't want to get into it and realize I'm missing tools. Greg, would it be possible for you to email me the pdfs that you attached above? They are printing out condensed and are difficult to read. My email is yyjsmith@lenoxnational.comyy (without y's).

(in reply to DISCOHAITI)

Post #: 15

RE: Brakes/Rotors/Sensors - 5/7/2007 10:30:40 AM

sysroute

Posts: 55
Joined: 2/2/2007
Status: offline

This product should be everything I need, correct?

http://www.roverparts.com/Parts/9540HP.cfm

(in reply to sysroute)

Post #: 16

RE: Brakes/Rotors/Sensors - 5/7/2007 10:44:00 AM

Rondo

Posts: 75
Joined: 4/14/2007
From: San Diego, CA
Status: offline

quote:

ORIGINAL: DISCOHAITI
I just bought an Actron autoscranner because my ABS/TC/DHC lights all came on and now my Service Engine soon light. Should be a good investment since it only cost me $99 from JC Whitney. The Land Rover Dealer in the DR wants to charge $100 to read the codes! At least now I have my very own reader.

Well unfortunately that is $99 wasted if you plan on using it to read your ABS codes. Land Rover and wealthy independent shops have the market cornered on reading and clearing those codes. Your scanner won't help you.

(in reply to DISCOHAITI)

Post #: 17

RE: Brakes/Rotors/Sensors - 5/7/2007 10:45:56 AM

Rondo

Posts: 75
Joined: 4/14/2007
From: San Diego, CA
Status: offline

quote:

ORIGINAL: sysroute

This product should be everything I need, correct?

http://www.roverparts.com/Parts/9540HP.cfm

Minus the tools and beer that is everything. You might want to grab some antisqueel spray for the back of the pads as extra insurance. A squeel can trigger the amigos and its cheap insurance against having to pay the dealer to clear the codes.

(in reply to sysroute)

Post #: 18

RE: Brakes/Rotors/Sensors - 5/19/2007 8:10:08 AM

sysroute

Posts: 55
Joined: 2/2/2007
Status: offline

Alright guys. I have the pads in and am ready to start this project. The directions look handy but unfortanutely I can't view the whole page. I really need to see the whole page so I know I'm not missing any steps. If you can email them to sysroute@yahoo.com it would be a great help. Or if someone can point me to some directions...

(in reply to Rondo)

Post #: 19

RE: Brakes/Rotors/Sensors - 5/19/2007 8:24:15 AM

Disco Mike

Posts: 10365
Joined: 4/27/2006
Status: offline

I didn't see if you mentioned having a hand held impact driver, which you will probably need to break loose the # 4 phillips head that holds the rotor to the hub.
Mike

(in reply to sysroute)

Post #: 20