Body corrosion

Land Rover Forums Land Rover Classifieds Photo Gallery Member List Calendars Search Contact Us Sponsors
Land Rover Lineup News Forum FAQ Land Rover Recalls TSBs Timeslips Register Login

Body corrosion

Printable Version

Land Rover >> Brand Reviews >> Appearance >> Body corrosion

Page: [1]

Message

<< Older Topic Newer Topic >>

Body corrosion - 6/12/2007 1:39:22 PM

chris

Posts: 3
Joined: 6/12/2007
Status: offline

I have got a 1998 Discovery tdi with a lot of patches of corrosion on the body,especially on the wheel arches.
How do i treat it,and do i need to treat up behind the wheel arches.
Also the wheels are corroding too,and need treating as soon as i can.
Chris

Post #: 1

RE: Body corrosion - 7/27/2007 9:59:44 PM

lowzq8

Posts: 3
Joined: 7/27/2007
Status: offline

im in auto collision right now.

if its just rust bubbles you just take lets say a 40 grit sandpaper and sand all the rust off about 3 inches past the corrosion area. then use a 3m brand body filler if needed. prime and paint. do not mask around the area for priming. it makes hardlines which make for hard sanding when you paint it.

this is the only correct way to fix rust without making it worse.

(in reply to chris)

Post #: 2

RE: Body corrosion - 8/2/2007 2:21:45 PM

chris

Posts: 3
Joined: 6/12/2007
Status: offline

Thanks for your help,Do I need an Etch Primer on Alluminium panels?
Chris

(in reply to lowzq8)

Post #: 3