RE: AUX Input- How to fabricate one?

Land Rover Forums Land Rover Classifieds Photo Gallery Member List Calendars Search Contact Us Sponsors
Land Rover Lineup News Forum FAQ Land Rover Recalls TSBs Timeslips Register Login

RE: AUX Input- How to fabricate one?

Printable Version

Land Rover >> Vehicle Line Up >> LR3 >> RE: AUX Input- How to fabricate one?

Page: << < prev 1 [2]

Message

<< Older Topic Newer Topic >>

RE: AUX Input- How to fabricate one? - 10/31/2007 7:22:45 AM

bbear

Posts: 1
Joined: 10/31/2007
Status: offline

Hi All;
as far as i am lead 2 believeon the back of the head unit(radio) u should have a black plug with a red,a blue,a black,and a black(little thicker).these r the aux input to the radio..all u need 2 do is cut the red,blue and the thicker black,connect yr mp3 cable to the radio side...red is right channel.blue is left channel.black is shield.....

(in reply to arijfeli)

Post #: 11

RE: AUX Input- How to fabricate one? - 5/3/2008 11:35:38 AM

psbfixit

Posts: 1
Joined: 5/3/2008
Status: offline

I feel your pain! I also have a base model 06' LR3, and can verify that there are no AUX input jacks of ANY kind ANYWHERE in the vehicle (so please don't ask me to look behind the center console). I'm trying to have a nav system with iPod capability installed, but even the custom shop (projecttwocustoms) is having a hard time finding a way to integrate the audio out from the nav, into the AUX in of the stereo. The stereo on the 05-06 V6 base model LR3 does have an AUX button, and when you press the button the stereo switches to AUX mode. Problem is that there is no way to harness into this. Bbear describes splicing into the harness, but the description is vague. Any more detailed info to tap into the AUX capability?

Thumbnail Image