discovery tdi front cv

Land Rover Forums Land Rover Classifieds Photo Gallery Member List Calendars Search Contact Us Sponsors
Land Rover Lineup News Forum FAQ Land Rover Recalls TSBs Timeslips Register Login

discovery tdi front cv

Printable Version

Land Rover Forum >> General Land Rover Forums >> General Tech Help >> discovery tdi front cv

Page: [1]

Message

<< Older Topic Newer Topic >>

discovery tdi front cv - 9/29/2007 1:45:26 PM

rdsc1975

Posts: 1
Joined: 9/29/2007
Status: offline

hello could any body tell me what sort of job it is to change the front cv joint what tools do i need
many thanks rich

Post #: 1

RE: discovery tdi front cv - 10/22/2007 11:27:30 AM

lee666

Posts: 3
Joined: 10/14/2007
Status: offline

recently done mine you have to remove the brake assembly and hub seperate the swivel housing from the ball and you can then draw the shaft i done one side in 3 hours as for tools if you have a hub nut socket and good range of sockets and spanners you should be ok when rebuilding swivel balls you should use a spring balance tool to set shim resistance on the housing pins i just used hand pressure to judge it. If you can get a manual it will guide you pretty well this job looks worse than it is.

(in reply to rdsc1975)

Post #: 2