front drive shaft blew
| Land Rover Forums Sponsor |
|
|
|
Login | |
|
front drive shaft blew - 11/19/2007 3:13:48 AM
|
|
|
sadystikal1
Posts: 12
Joined: 12/5/2005 Status: offline
|
so the front drive shaft went bye-bye, now my tranny when shifting from drive to park makes a nice loud grinding to gear sound, is the tranny gone or can it be rebuilt? i know that the tranny tends to go with the drive shaft but is it something easily repaired or should i drop and swap?
|
|
|
|
|
|
RE: front drive shaft blew - 11/19/2007 5:47:06 AM
|
|
|
Disco Mike
Posts: 11156
Joined: 4/27/2006 Status: online
|
Too bad you didn't see all the hundreds of post regarding the replacement of the front u-joints. By the way, what year is it, have you already replaced the drive shaft with another one with grease fittings on all 3 u-joints? As for the noise, you could have damaged either. Were either the tranny or t/case hit by the drive shaft, are either leaking oil? If it is the tranny, someone on the forum can't tell you for sure what the noise is and if it needs to be rebuilt or replaced. There are many factors to look at. I would suggest you take it to a tranny shop and see what they can tell you.
_____________________________
Mike Retired service manager. Member of the Solihull Society, NCLR club,past member of the SCLR club and Santa Barbara 4 Wheelers. 99 D2, 3" lift, lockers, H.D. axles, 4:11 gears, Custom front and rear bumpers, Warn winch, HID lights and an Engel 45.
|
|
|
|
RE: front drive shaft blew - 11/19/2007 5:54:47 AM
|
|
|
sadystikal1
Posts: 12
Joined: 12/5/2005 Status: offline
|
havent replaced it yet, i just pulled in from being out to sea, happened to my wife. i am going to buy one off ebay and get new ujoints and grease it all up. no fluid leaking, it is a 2002. yeah too bad i didnt see the posts until it was too late. i switched it in all the gears including 4wheel drive gears but only the tranny does it when drive to park and Rev to park. what are the general costs of getting one rebuilt, i was thinking of just buying a used one and seeing if a shop would put it in for me. little to cold out to be dong that in my driveway. lol.
|
|
|
|
RE: front drive shaft blew - 11/19/2007 6:11:53 AM
|
|
|
Disco Mike
Posts: 11156
Joined: 4/27/2006 Status: online
|
Give me a quick call and lets talk. 303-862-7680
_____________________________
Mike Retired service manager. Member of the Solihull Society, NCLR club,past member of the SCLR club and Santa Barbara 4 Wheelers. 99 D2, 3" lift, lockers, H.D. axles, 4:11 gears, Custom front and rear bumpers, Warn winch, HID lights and an Engel 45.
|
|
|
|
RE: front drive shaft blew - 11/19/2007 6:18:02 AM
|
|
|
sadystikal1
Posts: 12
Joined: 12/5/2005 Status: offline
|
i would love to right now but, the NAVY and i would not be able to until i am released this afternoon at 3est.
|
|
|
|
RE: front drive shaft blew - 11/19/2007 8:19:06 AM
|
|
|
Disco Mike
Posts: 11156
Joined: 4/27/2006 Status: online
|
I'll be around watching the Bronco's game so give me a call and I'll walk you thru a couple of things to check.
_____________________________
Mike Retired service manager. Member of the Solihull Society, NCLR club,past member of the SCLR club and Santa Barbara 4 Wheelers. 99 D2, 3" lift, lockers, H.D. axles, 4:11 gears, Custom front and rear bumpers, Warn winch, HID lights and an Engel 45.
|
|
|
|
RE: front drive shaft blew - 11/20/2007 10:33:31 AM
|
|
|
sadystikal1
Posts: 12
Joined: 12/5/2005 Status: offline
|
so mike, does the tranfer case go with it or is it normally only the tranny? i can get the tranny replaced but i just want to know if that will normally fix it.
|
|
|
|
RE: front drive shaft blew - 11/20/2007 12:11:21 PM
|
|
|
Disco Mike
Posts: 11156
Joined: 4/27/2006 Status: online
|
As I suggested before, call me, I need to get a few questions answered by you before I can help you.
_____________________________
Mike Retired service manager. Member of the Solihull Society, NCLR club,past member of the SCLR club and Santa Barbara 4 Wheelers. 99 D2, 3" lift, lockers, H.D. axles, 4:11 gears, Custom front and rear bumpers, Warn winch, HID lights and an Engel 45.
|
|
|
|
RE: front drive shaft blew - 11/20/2007 1:57:56 PM
|
|
|
okdiscoguy
Posts: 2485
Joined: 2/16/2007 From: Tulsa, OK Status: offline
|
quote:
ORIGINAL: sadystikal1 so mike, does the tranfer case go with it or is it normally only the tranny? i can get the tranny replaced but i just want to know if that will normally fix it. Just so you don't sit at work and freak out.... Replace your driveshaft first, your tranny might be fine. The transfer case on your year does not lock the front and rear driveshafts together. If your front shaft is gone, all of the power from the tranny will just spin on the open shaft. The transfer case will act like an open differential. With a 2002, you can't lock the T-case, with earlier D2's you could manually lock it, but yours doesn't have that feature. Replace the shaft and then check it. Still call Mike, he can walk you through a couple of things to check before you are able to replace the front shaft..
_____________________________
97 Discovery SD-7 156K miles 04 Cadillac CTS 34K miles Good Oil number of posts does not = knowledge (unless it is me)
|
|
|
|
Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Land Rover Prices
Land Rover
Defender
Discovery
Freelander
Range Rover
Range Rover Sport
Advertising Info
|
Contact Us |
Advertising |
Automotive Sites |
About Us |
Archive |
Land Rover Links |
Legal |
Privacy Policy |
© Land Rover Forums.com
Harley Davidson |
Honda CBR Motorcycle
Land Rover Forums .com is not affiliated with or endorsed by Ford Motor Company.
|