bulb holder wiring socket

Land Rover Forums Land Rover Classifieds Photo Gallery Member List Calendars Search Contact Us Sponsors
Land Rover Lineup News Forum FAQ Land Rover Recalls TSBs Timeslips Register Login

bulb holder wiring socket

Printable Version

Land Rover Forum >> Vehicle Line Up >> Discovery >> bulb holder wiring socket

Page: [1]

Message

<< Older Topic Newer Topic >>

bulb holder wiring socket - 1/3/2008 12:42:47 PM

zerochills

Posts: 73
Joined: 4/12/2007
Status: offline

went to change bulb in front passenger side signal and found that the bulb holder had burnt dew to water contact. was able to obtain bulb holder easily, however wiring harness bulb holder connects to was also burnt where the pins connect. have had no luck locating this at any independant land rover part supplier, is this an item a dealer is likely to carry?? or any other suggestion?

thanks for the help

_____________________________

2000 Land Rover Disco II
2003 Volvo S40
2003 Jaguar X Type

Post #: 1

RE: bulb holder wiring socket - 1/3/2008 3:06:28 PM

okdiscoguy

Posts: 2485
Joined: 2/16/2007
From: Tulsa, OK
Status: offline

I have a D1, so probably different, but the rear bumper cap was ripped off along with the the connector. I went to LR and they wanted $7 for the lens and $43 for the wiring harness/ bulb holder.

If you can, I would solder/heat shrink/liquid tape the connection. Call the dealer and price the harness. You might also call the guys at www.roverlandparts.com They are reasonable..

_____________________________

97 Discovery SD-7 156K miles
04 Cadillac CTS 34K miles
Good Oil
number of posts does not = knowledge (unless it is me)

(in reply to zerochills)

Post #: 2