RE: Throttle is Sticking on Disco II
Login  | |
|
RE: Throttle is Sticking on Disco II - 1/25/2008 1:08:47 PM
|
|
|
WolfPack
Posts: 389
Joined: 1/3/2008
Status: offline
|
Have you checked for physical obstructions at the pedal itself?
And he said he removed the cable and it still stuck in the throttle body..wouldn't that point back to the carbon build up like dkeach and I were mentioning?
_____________________________
2001 Range Rover 4.6 SE - Coil Sprung
2000 Chevy Blazer 4x4 4.3L V6 - The Beast
|
|
|
|
|
|
|
RE: Throttle is Sticking on Disco II - 1/25/2008 1:18:18 PM
|
|
|
Disco Mike
Posts: 9291
Joined: 4/27/2006
Status: offline
|
If he moved the t/body while the 2 cables are still hooked up and one of them is bad then the t/plate will still be hard to move, with both cables removed, 90% of the time the t/plate moves well.
< Message edited by Disco Mike -- 1/25/2008 2:36:28 PM >
_____________________________
Mike
Retired service manager. Member of the Solihull Society, NCLR club,past member of the SCLR club and Santa Barbara 4 Wheelers.
99 D2, 3" lift, lockers, H.D. axles, 4:11 gears, Custom front and rear bumpers, Warn winch, HID lights and an Engel 45.
|
|
|
|
|
RE: Throttle is Sticking on Disco II - 1/25/2008 1:53:52 PM
|
|
|
dkeach
Posts: 70
Joined: 11/6/2007
Status: offline
|
Hey Mike............I'll bet you a lunch man!!! LOL
dk
|
|
|
|
|
RE: Throttle is Sticking on Disco II - 1/25/2008 1:57:24 PM
|
|
|
dkeach
Posts: 70
Joined: 11/6/2007
Status: offline
|
Maybe I should take that back. Colorado is quite a drive for me..no wait...If you win Mike you have to come to Illinois to get your lunch.
dk
|
|
|
|
|
RE: Throttle is Sticking on Disco II - 1/25/2008 2:37:56 PM
|
|
|
Disco Mike
Posts: 9291
Joined: 4/27/2006
Status: offline
|
If I win, you can't cave on this love hate relations hip you have with your Disco.
_____________________________
Mike
Retired service manager. Member of the Solihull Society, NCLR club,past member of the SCLR club and Santa Barbara 4 Wheelers.
99 D2, 3" lift, lockers, H.D. axles, 4:11 gears, Custom front and rear bumpers, Warn winch, HID lights and an Engel 45.
|
|
|
|
|
RE: Throttle is Sticking on Disco II - 1/25/2008 2:52:50 PM
|
|
|
dkeach
Posts: 70
Joined: 11/6/2007
Status: offline
|
So far there has been no pressure from the wife to sell it Mike. I think she has the love/hate thing going on too!! LOL. as long as we can maintain the love part I may be able to retain ownership, especially if it proves it self a bit more reliable here as we go.
Back to the subject matter of this thread. My Throttle plate was gummed up pretty bad recently, and was sticking to the point that after you built up cable tension and it let go, it would rev to about 2200 while sitting in park. It would only stick that bad if you backed off the throttle real snappy and the plate "banged" home.This is why I'm still banking on the gummed up throttle plate and hoping the original symptom was slightly exaggerated.
I hope we get the results soon. I like to eat lunch at those places with the cloth napkins.
dk
|
|
|
|
|
RE: Throttle is Sticking on Disco II - 1/25/2008 3:42:06 PM
|
|
|
Disco Mike
Posts: 9291
Joined: 4/27/2006
Status: offline
|
Always possible, I just have a hard time thinking someone would let it get that bad.
_____________________________
Mike
Retired service manager. Member of the Solihull Society, NCLR club,past member of the SCLR club and Santa Barbara 4 Wheelers.
99 D2, 3" lift, lockers, H.D. axles, 4:11 gears, Custom front and rear bumpers, Warn winch, HID lights and an Engel 45.
|
|
|
|
|
Printable Version
