Installing aftermarket receiver in 1997 Disco

Land Rover Forums Land Rover Classifieds Photo Gallery Member List Calendars Search Contact Us Sponsors
Land Rover Lineup News Forum FAQ Land Rover Recalls TSBs Timeslips Register Login

Installing aftermarket receiver in 1997 Disco

Printable Version

Land Rover >> Brand Reviews >> Audio/Visual Electronics >> Installing aftermarket receiver in 1997 Disco

Page: [1]

Message

<< Older Topic Newer Topic >>

Installing aftermarket receiver in 1997 Disco - 8/27/2005 9:31:54 PM

adowgiert

Posts: 60
Joined: 8/13/2005
From: The Garden State Yo!
Status: offline

Does anyone have any tips on installing an aftermarket in dash cd player? Do you just need the wiring harness? Or do you need some kind of converter for the amps? Which wire is the antenna? And what the heck is that big multi-pin connector that comes out of the back of the factory cassette deck? Any help would be greatly appreciated.

_____________________________

Arman

1997 Disco I slowly being whipped in to shape.

Post #: 1

RE: Installing aftermarket receiver in 1997 Disco - 9/4/2005 3:00:21 PM

GONZO

Posts: 1
Joined: 9/4/2005
Status: offline

I had the same issue, if your going to install a new head unit you have to bypass the sock AMP. I could not find a wire harness that would work while keeping the two 6" subs in the tail gate door working. The only way around it is to get the harness for the head unit and get a small four chanel amp for the subs. Or just do what I did just redue the whole damn thing,keep the highs up front New head unit 4 6.5" speakers and 2 6" subs and a AMP to power them all.

(in reply to adowgiert)

Post #: 2