Land Rover Forum
Land Rover Forums   Land Rover Classifieds   Photo Gallery   Member List   Calendars   Search   Contact Us   Sponsors
Land Rover Lineup   News   Forum FAQ   Land Rover Recalls   TSBs   Timeslips   Register   Login  
 

range rover cyl 2.4,6,8 problem

  Printable Version
Land Rover Forums >> General Land Rover Forums >> General Tech Help >> range rover cyl 2.4,6,8 problem Page: [1]
Login
Message << Older Topic   Newer Topic >>
range rover cyl 2.4,6,8 problem - 2/10/2008 3:13:11 PM   
pedrom

 

Posts: 2
Joined: 2/10/2008
Status: offline
Hi if somebody can't help me. I have a 1990 range rover county 3.9. I bought it with cyl #7 dead no compression,took the heads out and #7 had intake valve seat pulled out and no damage to piston. Then I send the heads to be repaired at the machine shop.Then i put new timing chain and sprokets with the repaired heads and gaskets. I start using the rover but it lacks of power ,i check the compression again and i have more than 155 psi in every cyl. But i found spark plugs 2,4,6,8 clean and i mean white compared to 1,3,5,7 that have a nice brownish color, the thing is if i touch the exhaust manifold from 2,4,6,8 side is cold to the touch compared to the other side manifold that wiil burn your hand right away. Today i try swapping both o2 sensors nothing change ,a  friend told me that if right catalitic converter is clogged it could be my problem. Another thing is that i try pulling out fuel injector plugs from 2,4,6,8 and nothing happened but when i pulled 1,3,5,7 the engine start misfiring. Sorry to be this long but i ran out of troubleshooting ideas!
Post #: 1
RE: range rover cyl 2.4,6,8 problem - 2/10/2008 4:17:16 PM   
Disco Mike


Posts: 9554
Joined: 4/27/2006
Status: offline
Sounds like you may have a coolant leak on the right bank.
Might want to do a pressure test on the coolant system.

_____________________________

Mike
Retired service manager. Member of the Solihull Society, NCLR club,past member of the SCLR club and Santa Barbara 4 Wheelers.
99 D2, 3" lift, lockers, H.D. axles, 4:11 gears, Custom front and rear bumpers, Warn winch, HID lights and an Engel 45.

(in reply to pedrom)
Post #: 2
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
 
Land Rover >> General Land Rover Forums >> General Tech Help
Jump to:



Featured Sponsors
Advertising Info

Top 10 Posters
disco mike9554
spike5552791
okdiscoguy2403
landzu1801
05landrover1072
mikemeyer0945
darover721
ajh705
camdisco24664
bait631

New Vendors
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.

Harley Davidson | Honda CBR Motorcycle

Land Rover Forums .com is not affiliated with or endorsed by Ford Motor Company.