|
dodge_mich -> RE: 1994 - Keyless entry? (2/25/2008 8:26:46 PM)
|
At this point, I'm thinking it's only on '96 and up. I can't even get to the point where I use the remote, following the manual procedure: 1. Starting conditions: ignition off, doors unlocked, bonnet switch depressed. 2. Carry out instructions 3. to 9. within 8 seconds. 3. Switch ignition ON. 4. Switch ignition OFF. 5. Lock doors. 6. Unlock doors. 7. Release bonnet switch. 8. Switch ignition ON. 9. Switch ignition OFF. If alarm is correctly accessed, horn will sound and LED will light. It is now possible to programme two handsets of correct frequency to vehicle alarm ECU. This must be carried out within two minutes. 10. Press and hold down button on first handset until dash LED flashes. 11. Repeat instruction 10. for second handset. 12. The LED will extinguish if both handsets have been initialised correctly.
|
|
|
|