RE: HELP! Rough Idle, Vac hose???
Login  | |
|
RE: HELP! Rough Idle, Vac hose??? - 3/3/2008 11:55:46 AM
|
|
|
Disco Mike
Posts: 9554
Joined: 4/27/2006
Status: offline
|
ny cracked hose can cause a problem, and no you will need to clear the code once the repairs are made
_____________________________
Mike
Retired service manager. Member of the Solihull Society, NCLR club,past member of the SCLR club and Santa Barbara 4 Wheelers.
99 D2, 3" lift, lockers, H.D. axles, 4:11 gears, Custom front and rear bumpers, Warn winch, HID lights and an Engel 45.
|
|
|
|
|
|
|
RE: HELP! Rough Idle, Vac hose??? - 3/3/2008 11:58:24 AM
|
|
|
JPC97DiscoSD
Posts: 41
Joined: 2/29/2008
Status: offline
|
thanks for the reply. Is there anyway i can clear the codes myself?
|
|
|
|
|
RE: HELP! Rough Idle, Vac hose??? - 3/3/2008 12:03:00 PM
|
|
|
okdiscoguy
Posts: 2403
Joined: 2/16/2007
From: Tulsa, OK
Status: offline
|
The small hoses in the tee are for your cruise control. The ripped hose you have can be purchased at www.roverparts.com, but with shipping, your dealer should be about the same. Plus you get it right now...
I can tell you the your Bosch wires are junk. I threw a set on mine when I got it, not knowing any better. They were toast in less than a year, and they replaced them under warranty. I got a new set of 8MM Magnacor wires and haven't had any more troubles. Really, they are the only way to go. www.apexperformance.net has a good price for the set. If you look at your throttle body from the front of the truck, there are 2 connectors the plug wires into things. The one on the right is your IACV, and the left one is your TPS.
Google Rave download and you can download a free shop manual for your truck, or buy one on CD for $10 on E-bay...
Also, Harbor freight has a code scanner for $40 that will clear your codes. Well worth it.
_____________________________
97 Discovery SD-7 156K miles
04 Cadillac CTS 34K miles
Good Oil
number of posts does not = knowledge (unless it is me)
|
|
|
|
|
RE: HELP! Rough Idle, Vac hose??? - 3/3/2008 3:34:30 PM
|
|
|
JPC97DiscoSD
Posts: 41
Joined: 2/29/2008
Status: offline
|
Thanks alot for the info, so Maganacor is where its at, I will pick up a set. Also, I'll let you know when I get this issue squared away with my idle.
|
|
|
|
|
RE: HELP! Rough Idle, Vac hose??? - 3/5/2008 10:15:13 PM
|
|
|
JPC97DiscoSD
Posts: 41
Joined: 2/29/2008
Status: offline
|
ok my disco is still shaking/rumbling but not that bad but you can notice it and feel it in your seat when ideling. Now when i drive it the motor hesitates at like 1500-2000 rpms until itake my foot off of the gas and gas it it to pop past it. My question is could my problem be the coil pack because i had already replaced the plugs and wires, or fuel pump/filter, or is my problem air related is my MAF faulty? thanks
|
|
|
|
|
RE: HELP! Rough Idle, Vac hose??? - 3/6/2008 6:29:53 AM
|
|
|
Disco Mike
Posts: 9554
Joined: 4/27/2006
Status: offline
|
You really need to quit throwing money at your truck and start thinking smart, kind of get back to the basics.
Any codes?
If you want to call me I'll try and help you.
303-862-7680
Colorado before 8 pm any day
_____________________________
Mike
Retired service manager. Member of the Solihull Society, NCLR club,past member of the SCLR club and Santa Barbara 4 Wheelers.
99 D2, 3" lift, lockers, H.D. axles, 4:11 gears, Custom front and rear bumpers, Warn winch, HID lights and an Engel 45.
|
|
|
|
|
RE: HELP! Rough Idle, CEL code 300 - 3/6/2008 9:53:55 AM
|
|
|
BADBUZzZzZz
Posts: 90
Joined: 1/18/2008
From: IDAHO
Status: offline
|
You could have a loose wire? Go push them in and see if one is loose!
|
|
|
|
|
Printable Version
