BODY ARMOR

Printable Version

Land Rover >> Vehicle Line Up >> LR3 >> BODY ARMOR

Page: [1]

Login Message << Older Topic   Newer Topic >>

BODY ARMOR - 3/18/2008 3:29:05 PM    drzjoint   Posts: 249 Joined: 1/5/2008 Status: offline HAS ANYONE TRIED TO MAKE PROTECTIVE SHEETS TO COVER THE SHEET METAL FOR GOING OFF ROAD MADE OUT OF A MAGNETIC VINYL I HAVE SEEN IT FOR JEEPS AND HUMMERS N SUCH. COULD NOT FIND ANY PRE CUT FOR THE LR3 SO I AM GOING TO ATTEMPT TO MAKE MY OWN SO WHEN I GO OUT IN THE BUSH I DOT GET THE VEHICLE ALL SCRATCHED UP. IS THEIR ANY INTEREST FOR A PRODUCT LIKE THIS FOR OTHER LR3 OWNERS IF SO LET ME KNOW. AND I WILL POST PICS OR A LINK TO PICS. IF IT IS NOT TO BAD I WOULD MAKE SOME FOR OTHERS AS WELL. I AM GOING TO USE .030 THICKNESS AND IS 2' X 50' ROLL LOOKS LIKE I WILL HAVE AROUND 200-250 INTO IT AT THE MOST. THE CRAP IS SUPPOSED TO BE HEAVY ANY SUGGESTIONS?? _____________________________ 05 LR3 - 7 SE BLUE V8 aka "THE JUGGERNAUT BITCH" Post #: 1

RE: BODY ARMOR - 3/19/2008 10:27:27 AM    Jantiz Posts: 376 Joined: 2/2/2007 Status: offline I would be interested to see what it looks like once it's done. _____________________________ 2006 LR3 HSE / Java Black / NCLR Member (in reply to drzjoint) Post #: 2

RE: BODY ARMOR - 3/19/2008 10:55:37 AM    drzjoint   Posts: 249 Joined: 1/5/2008 Status: offline I WILL POST PICS OR A LINK TO THE PICS IT WILL BE A FEW WEEKS I JUST GOT IT IN TODAY SO I HAVE TO START MAKING TEMPLATES AND THEN CUT IT ALL OUT _____________________________ 05 LR3 - 7 SE BLUE V8 aka "THE JUGGERNAUT BITCH" (in reply to Jantiz) Post #: 3

RE: BODY ARMOR - 3/27/2008 4:52:14 AM    drzjoint   Posts: 249 Joined: 1/5/2008 Status: offline well after 3 hrs the fender is done  you have to be patient hopefully ill have time to do another piece today at least i only have to do one side. thankyou symetry _____________________________ 05 LR3 - 7 SE BLUE V8 aka "THE JUGGERNAUT BITCH" (in reply to drzjoint) Post #: 4

RE: BODY ARMOR - 3/29/2008 7:44:08 PM    drzjoint   Posts: 249 Joined: 1/5/2008 Status: offline wow almost done with the body armor only the qarter pannels are left for the big pieces the tuff molds awsome just put a hair drier on it or do it durring a warm sunny day the fender was the hardest so far. _____________________________ 05 LR3 - 7 SE BLUE V8 aka "THE JUGGERNAUT BITCH" (in reply to drzjoint) Post #: 5

RE: BODY ARMOR - 4/6/2008 2:48:30 PM    davidlt Posts: 53 Joined: 1/21/2008 Status: offline I too would be interested in seeing the final result. Sounds very intriguing. Are you still attaching magnetically? (in reply to drzjoint) Post #: 6

RE: BODY ARMOR - 4/6/2008 6:06:30 PM    drzjoint   Posts: 249 Joined: 1/5/2008 Status: offline ya it is all going on magnetically. except the hood = alluminum and the gas cap area=plastic but yes it is close to done i have all the big pieces done now i am working on pillars and roof i am dooing as much area i can with 150ft roll. _____________________________ 05 LR3 - 7 SE BLUE V8 aka "THE JUGGERNAUT BITCH" (in reply to davidlt) Post #: 7

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Land Rover Prices

Land Rover
Defender
Discovery
Freelander
Range Rover
Range Rover Sport

Top 10 Posters
disco mike 9554 spike555 2758 okdiscoguy 2403 landzu 1800 05landrover 1072 mikemeyer0 945 darover 716 ajh 705 camdisco24 664 bait 631

New Vendors
AMSOIL - Performance Oil Technology
K&N Engineering, Inc.