91 classic ABS PUMP/relay issue

Printable Version

Land Rover Forums >> Vehicle Line Up >> Range Rover >> 91 classic ABS PUMP/relay issue

Page: [1]

Login Message << Older Topic   Newer Topic >>

91 classic ABS PUMP/relay issue - 4/10/2008 8:24:17 AM    tre976   Posts: 10 Joined: 2/12/2008 Status: offline So my pump is running after the rover is turned off and sounds horrible ( happened just once so far ) - after googling I found that I should replace the ABS relay(s) first. Is there just 1 relay or 2? And are they/it under the driver seat?  I found an older post of someone who swapped out a 30a circuit under the seat but I'm unsure if thats the same thing. Dap-INC has the ABS relay listed at 36 bucks or so, is there another alt to use -much like the stepper motor alt ? thanks! Post #: 1

RE: 91 classic ABS PUMP/relay issue - 4/15/2008 8:35:50 PM    tre976   Posts: 10 Joined: 2/12/2008 Status: offline could someone confirm that the relays are under the driver seat in the ecu?? (in reply to tre976) Post #: 2

RE: 91 classic ABS PUMP/relay issue - 4/16/2008 6:33:03 PM    northcountry32 Posts: 1 Joined: 4/16/2008 Status: offline Yes the relays are under the seat with the ecu. There is a pump relay and a load relay. (in reply to tre976) Post #: 3

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Land Rover Prices

Land Rover
Defender
Discovery
Freelander
Range Rover
Range Rover Sport

Top 10 Posters
disco mike 10374 spike555 4848 okdiscoguy 2484 landzu 2080 05landrover 1072 mikemeyer0 945 darover 892 disco2guy 787 camdisco24 724 ajh 714

New Vendors
AMSOIL - Performance Oil Technology