rear drive shaft flange (Full Version)

Land Rover Forums >> Vehicle Line Up >> Discovery

rear drive shaft flange

  

khuds308 -> rear drive shaft flange (5/10/2008 1:57:44 PM)

    I need to replace the 3-bolt flange on the rear diff. I am having trouble finding the part for sale. does anyone know if you have to take the diff apart to replace this? it's for a 1996 disco.

THanks

  
Disco Mike -> RE: rear drive shaft flange (5/11/2008 8:45:49 AM)

Why are you replacing it?
If it is for a leak, no you won't have to pull the 3rd. member unless the pinion gear shaft has a grove warn in it.
Call Bill at Great Basin's Rovers in Salt Lake City, he should be able to help you.

khuds308 -> RE: rear drive shaft flange (5/11/2008 9:03:03 AM)

no it's not leaking.  i just purchased the car for a smoking deal, but the dudes vlex coupler went out and the drive shaft ended up on the 101 loop.  when the drive shaft came apart it chewed up the metal on that yoke, so i need to replace it.  i know on a lot of american cars/trucks there is just a bolt in the center of the yoke but i couldn't see it when i was under there yesterday.  

Landzu -> RE: rear drive shaft flange (5/11/2008 4:51:55 PM)

You need to have a special tool to pull the center plug that is used to line up flex joint then under that is the nut that comes out.

khuds308 -> RE: rear drive shaft flange (5/12/2008 7:38:43 PM)

Is this special tool just a puller that i can rent at the auto part store or is it something the dealership has? 

  

Page: [1]

Return to Land Rover Forums home page or view the Full Version of this page.