how can i read my codes

Land Rover Forums Land Rover Classifieds Photo Gallery Member List Calendars Search Contact Us Sponsors
Land Rover Lineup News Forum FAQ Land Rover Recalls TSBs Timeslips Register Login

how can i read my codes

Printable Version

Land Rover >> General Land Rover Forums >> General Tech Help >> how can i read my codes

Page: [1]

Message

<< Older Topic Newer Topic >>

how can i read my codes - 8/19/2008 7:22:24 AM

benflynn

Posts: 45
Joined: 4/22/2007
Status: offline

on my 95 disco, it runs like crap, bogs(rich) under load, but clears up if i open it up(suggesting to me it is not a FP problem), i swapped in another AMM, but that was no help, and i ordered another ign mod(43$ shipped) since it seems to get worse w/heat soak. I would like to read the codes tho, i know there is a display under the seat, i just don''t know how to get it to flash

i did a search, since this has to of been asked over and over but i couldn''t find much

and my mpg is terrible, if i can get it back to stage0 i will pull the v8 apart and add a little squish and CR, slight p&p and port mach everything, destress the rods and all the other free little tricks while it is apart

Post #: 1

RE: how can i read my codes - 8/19/2008 6:00:50 PM

NYDISCO

Posts: 15
Joined: 10/25/2006
Status: offline

Those are ODB1 I believe...

(in reply to benflynn)

Post #: 2

RE: how can i read my codes - 8/19/2008 6:20:16 PM

benflynn

Posts: 45
Joined: 4/22/2007
Status: offline

http://www.robisonservice.com/servicedep/rover_trouble.asp#1990

i was thinking a blinking led

here we go, now i thought 96 was obd1, i don''t think i have the obd plug, what i need to know is where is the serial plug to clear my code(44 so far)

_____________________________

95 Disco
sooperpimpin volvo 744t

(in reply to NYDISCO)

Post #: 3